Foam Filled Floating Fenders to France

2024.6.20-2024.8.23 4 Pieces of foam filled floating type fenders TD-F2000X3500L for the project of Le Havre port, France in 2024. For this project, we well controlled the appearance of these fenders very strictly according to the customer's requirem...

DOS BOCAS project with Cone 1000H fender systems and 100T Bollards to Mexico

Cone 1000H fender systems and 100T Bollards to Mexico 2024.7.4-2024.8.28 This order totally contains 26sets super cone fenders of TD-AA1000X1X1 with steel frames and all cast in type fixings, and 26 sets 100T nose type Bollards as well as 5sets Rubbe...

30T- und 75T-Hornpoller mit der Projektnummer 240702 nach Klang Port, Malaysia

Diese Bestellung enthält insgesamt 8 Sätze 30T-Hornpoller und 11 Sätze 75T-Hornpoller für das Projekt des Hafens von Kelang, Malaysia. Alle Pollermaterialien sind aus duktilem Gusseisen, QT450-10, GB / T1348-2017, ASTM A536-Gr65-45-120, alle eingegos...

116pcs V-P 500X762+762 fender with bonded UHMW-PE to SEATTLE, USA

116pcs V-P 500X762+762 fender with bonded UHMW-PE to SEATTLE, USA With the Project No. 1491 , this order required special arch type fender boned with UHMW-PE pads directly without any bolts. Our Tiandun company is much experienced in this kind of ...

Cylindrical, Cone and DD Fenders to Southampton, Uk

Project No. 24053, 24054 - Cylindrical, Cone and DD Fenders 2024.8.7-2024.9.24 This order totally contains 2pcs Cone 860, 16pcs DD200X200X2000 and 24pcs C500x250x1000 fenders for a project in 2024. Before and after production all rubber compounds sho...

Super Cone Fender system TD-AA700X1X1 to Duala port Cameroon

Super Cone Fender system TD-AA700X1X1 to Duala port Cameroon Project No. 0394 – May 14, 2024 to Sept 18, 2024 This order totally contains 10 sets super cone fenders of TD-AA700 and steel Frontal Frame 1450X1450X200 for a project located at Duala por...

Element Fenders to Hamburg, Germany

Project No. 6002 with Element Fenders to Hamburg, Germany May 16, 2024 - Sept 29, 2024 This order totally contains 204pcs FE800X1500, 102pcs FE800X1000 Element fenders for the project of Hamburg port Germany. Before and after production all rubber co...

Cone Fender and Arch Fender systems to Philippines

Project No. 0203-Cone Fender and Arch Fender systems to Philippines 2024.6.6-2024.9.4 This order totally contains 49sets super cone Fender system of TD-AA 900HX1X1 with steel frame 3350X1300X220 and 16pcs Arch Fender 500X1000+1250, all with later bui...

Viele Elementkotflügel nach Rotterdam

Projekt Nr. 0306 - viele Elementkotflügel nach Rotterdam 19. Dezember 2023-24. Juni 2024 Dieser Großauftrag besteht insgesamt aus 444 Stück Element-Kotflügeln 1250HX1460L, 352 Stück Element-Kotflügeln 300HX1475L und 88 Stück Element-Kotflügeln 250HX1...

Zylindrische und Elementkotflügel für den Hafen von Antwerpen

Projekt Nr. 23025 - Zylindrische und Element-Kotflügel für den Hafen von Antwerpen 6. Dezember 2023 bis 24. Mai 2024 Diese Bestellung enthält insgesamt 65 Stück C1500X750X2000, 26 Stück C1400X800X1000, 32 Stück QME800X1000 und 8 Stück QME500X1000 Kot...